Hydrogen is widely regarded as a key energy carrier for enabling deep decarbonisation across multiple sectors, due to its versatility and the absence of direct carbon dioxide emissions at the point of use. However, the overall environmental performance of hydrogen systems remains subject to significant uncertainties, which limit the robustness of current assessments and the effectiveness of policy instruments supporting its deployment. These uncertainties primarily arise from three interconnected aspects: hydrogen leakages along the supply chain, the indirect climate impact of atmospheric hydrogen, and the representation of end-use processes, particularly those based on combustion. Hydrogen emissions are commonly evaluated within Life Cycle Assessment (LCA) frameworks, yet existing studies often rely on simplified assumptions for leakage rates, which are poorly constrained by experimental data. At the same time, the indirect climate impact of hydrogen is associated with complex interactions within atmospheric chemistry, where hydrogen influences the abundance and lifetime of key species such as methane, ozone and water vapour. As a result, the Global Warming Potential (GWP) of hydrogen spans a wide range of values in the literature, reflecting uncertainties in both chemical mechanisms and modelling approaches. In addition, end-use processes remain less systematically addressed, despite their potential influence on pollutant formation and atmospheric composition. In this context, the present thesis aims to provide a more physically grounded assessment of key processes governing hydrogen deployment, by integrating experimental investigation, local atmospheric modelling and detailed kinetic analysis. First, hydrogen leakages are investigated through the development of an experimental setup designed to detect non-forced emissions under conditions representative of distribution systems. Second, the atmospheric impact of hydrogen is analysed using an atmospheric box model, developed to simulate local chemical environments under measured conditions. The model is applied to representative marine, urban and rural scenarios, allowing for the comparison of different reduced chemical mechanisms commonly used in global models. The analysis focuses on the response of key radical species, particularly OH and HO₂, and highlights the sensitivity of atmospheric composition to the choice of kinetic scheme, providing a mechanistic perspective on uncertainties associated with GWP estimates. Finally, the thesis addresses the determination of pressure-dependent kinetic parameters for key reactions in the hydrogen combustion mechanism. Rate coefficients are calculated using an ab initio Transition State Theory–Master Equation (AI–TST–ME) framework, combined with a consistent treatment of mixture effects through Reduced Pressure-based Linear Mixture Rules (LMR-R). The resulting kinetic model is validated against experimental data, including ignition delay times, laminar flame speeds and jet-stirred reactor measurements, improving the physical understanding of hydrogen reactivity while reducing the need for empirical tuning. Overall, this work contributes to reducing key sources of uncertainty in the environmental assessment of hydrogen systems by linking experimental evidence, atmospheric modelling and combustion kinetics within a coherent framework. The results underline the importance of accurately representing hydrogen losses, atmospheric chemical processes and end-use behaviour in order to reduce uncertainties in climate impact assessments and support the development of effective policy and technological frameworks.
L'idrogeno è ampiamente considerato uno dei principali vettori energetici per favorire una profonda decarbonizzazione di numerosi settori, grazie alla sua versatilità e all'assenza di emissioni dirette di anidride carbonica durante l'utilizzo. Tuttavia, le prestazioni ambientali complessive dei sistemi a idrogeno sono ancora caratterizzate da significative incertezze, che limitano l'affidabilità delle valutazioni disponibili e l'efficacia degli strumenti di policy a supporto della loro diffusione. Tali incertezze derivano principalmente da tre aspetti tra loro interconnessi: le emissioni di idrogeno lungo la filiera, l'impatto climatico indiretto dell'idrogeno in atmosfera e la rappresentazione dei processi di utilizzo finale, con particolare riferimento ai sistemi basati sulla combustione. Le emissioni di idrogeno vengono generalmente valutate mediante approcci di Life Cycle Assessment (LCA); tuttavia, gli studi disponibili si basano spesso su ipotesi semplificate riguardanti i tassi di perdita, ancora scarsamente supportate da evidenze sperimentali. Parallelamente, l'impatto climatico indiretto dell'idrogeno è legato a complesse interazioni della chimica atmosferica, attraverso le quali esso influenza la concentrazione e il tempo di permanenza in atmosfera di specie chiave quali metano, ozono e vapore acqueo. Di conseguenza, il Global Warming Potential (GWP) dell'idrogeno presenta in letteratura un ampio intervallo di valori, riflettendo le incertezze associate sia ai meccanismi chimici sia agli approcci di modellazione. Inoltre, i processi di utilizzo finale risultano ancora meno sistematicamente investigati, nonostante il loro potenziale impatto sulla formazione di inquinanti e sulla composizione dell'atmosfera. In questo contesto, la presente tesi si propone di fornire una valutazione maggiormente fondata dal punto di vista fisico dei principali processi che governano l'impiego dell'idrogeno, attraverso un approccio integrato che combina attività sperimentale, modellazione atmosferica locale e analisi cinetica dettagliata. In primo luogo, le emissioni di idrogeno sono state investigate mediante lo sviluppo di un banco sperimentale progettato per rilevare perdite non forzate in condizioni rappresentative delle reti di distribuzione del gas. Successivamente, l'impatto atmosferico dell'idrogeno è stato analizzato mediante un modello atmosferico a scatola (box model), sviluppato per simulare ambienti chimici locali sulla base di dati sperimentali. Il modello è stato applicato a scenari rappresentativi di ambiente marino, urbano e rurale, consentendo il confronto tra differenti meccanismi chimici ridotti comunemente impiegati nei modelli atmosferici globali. L'analisi si concentra sulla risposta delle principali specie radicaliche, in particolare OH e HO₂, evidenziando la sensibilità della composizione atmosferica alla scelta dello schema cinetico e fornendo una chiave di lettura meccanicistica delle incertezze associate alla stima del GWP dell'idrogeno. Infine, la tesi affronta la determinazione dei parametri cinetici dipendenti dalla pressione per alcune reazioni fondamentali del meccanismo di combustione dell'idrogeno. I coefficienti cinetici sono stati calcolati mediante un approccio ab initio basato sull'integrazione della Transition State Theory e della Master Equation (AI–TST–ME), combinato con una trattazione coerente degli effetti di miscela attraverso le Reduced Pressure-based Linear Mixture Rules (LMR-R). Il modello cinetico ottenuto è stato validato mediante confronto con dati sperimentali relativi ai tempi di autoaccensione, alle velocità di propagazione laminare della fiamma e ai reattori jet-stirred, contribuendo a migliorare la comprensione fisica della reattività dell'idrogeno e a ridurre la necessità di calibrazioni empiriche. Nel complesso, questo lavoro contribuisce a ridurre alcune delle principali fonti di incertezza nella valutazione ambientale dei sistemi a idrogeno, integrando evidenze sperimentali, modellazione atmosferica e cinetica della combustione all'interno di un quadro metodologico coerente. I risultati ottenuti evidenziano l'importanza di rappresentare in modo accurato le perdite di idrogeno, i processi chimici atmosferici e i fenomeni di utilizzo finale al fine di migliorare l'affidabilità delle valutazioni dell'impatto climatico e supportare lo sviluppo di politiche e tecnologie efficaci per la transizione energetica.
Hydrogen environmental impact: legislation and policy, leakage, combustion and atmospheric chemistry
Primi, Matteo
2026
Abstract
Hydrogen is widely regarded as a key energy carrier for enabling deep decarbonisation across multiple sectors, due to its versatility and the absence of direct carbon dioxide emissions at the point of use. However, the overall environmental performance of hydrogen systems remains subject to significant uncertainties, which limit the robustness of current assessments and the effectiveness of policy instruments supporting its deployment. These uncertainties primarily arise from three interconnected aspects: hydrogen leakages along the supply chain, the indirect climate impact of atmospheric hydrogen, and the representation of end-use processes, particularly those based on combustion. Hydrogen emissions are commonly evaluated within Life Cycle Assessment (LCA) frameworks, yet existing studies often rely on simplified assumptions for leakage rates, which are poorly constrained by experimental data. At the same time, the indirect climate impact of hydrogen is associated with complex interactions within atmospheric chemistry, where hydrogen influences the abundance and lifetime of key species such as methane, ozone and water vapour. As a result, the Global Warming Potential (GWP) of hydrogen spans a wide range of values in the literature, reflecting uncertainties in both chemical mechanisms and modelling approaches. In addition, end-use processes remain less systematically addressed, despite their potential influence on pollutant formation and atmospheric composition. In this context, the present thesis aims to provide a more physically grounded assessment of key processes governing hydrogen deployment, by integrating experimental investigation, local atmospheric modelling and detailed kinetic analysis. First, hydrogen leakages are investigated through the development of an experimental setup designed to detect non-forced emissions under conditions representative of distribution systems. Second, the atmospheric impact of hydrogen is analysed using an atmospheric box model, developed to simulate local chemical environments under measured conditions. The model is applied to representative marine, urban and rural scenarios, allowing for the comparison of different reduced chemical mechanisms commonly used in global models. The analysis focuses on the response of key radical species, particularly OH and HO₂, and highlights the sensitivity of atmospheric composition to the choice of kinetic scheme, providing a mechanistic perspective on uncertainties associated with GWP estimates. Finally, the thesis addresses the determination of pressure-dependent kinetic parameters for key reactions in the hydrogen combustion mechanism. Rate coefficients are calculated using an ab initio Transition State Theory–Master Equation (AI–TST–ME) framework, combined with a consistent treatment of mixture effects through Reduced Pressure-based Linear Mixture Rules (LMR-R). The resulting kinetic model is validated against experimental data, including ignition delay times, laminar flame speeds and jet-stirred reactor measurements, improving the physical understanding of hydrogen reactivity while reducing the need for empirical tuning. Overall, this work contributes to reducing key sources of uncertainty in the environmental assessment of hydrogen systems by linking experimental evidence, atmospheric modelling and combustion kinetics within a coherent framework. The results underline the importance of accurately representing hydrogen losses, atmospheric chemical processes and end-use behaviour in order to reduce uncertainties in climate impact assessments and support the development of effective policy and technological frameworks.| File | Dimensione | Formato | |
|---|---|---|---|
|
PhD_thesis_Matteo_Primi.pdf
non disponibili
Licenza:
Tutti i diritti riservati
Dimensione
5.2 MB
Formato
Adobe PDF
|
5.2 MB | Adobe PDF |
I documenti in UNITESI sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/20.500.14242/385112
URN:NBN:IT:POLIMI-385112